NEC KEY PROGRAMMER V. 12

NEC KEY PROGRAMMER V. 12

With the use of the software and hardware of NEC KEY PROGRAMMER V.12 one can program keys in Mercedes Benz cars starting 2001 till 2010/2011 (see models below). Once again, as a world leader in keys programming in Mercedes-Benz cars we had designed and released set that allows to:

- Read information from the car without the need to remove anything

- Can work in offline mode (no internet connection needed)

- Calculate keys in a very fast way

- One can program keys through the IR ports

€ 525.00
€ 525.00
NEC KEY PROGRAMMER V. 12 WITHOUT THE CASE

NEC KEY PROGRAMMER V. 12 WITHOUT THE CASE
new!

With the use of the software and hardware of NEC KEY PROGRAMMER V.12 one can program keys in Mercedes Benz cars starting 2001 till 2010/2011 (see models below). Once again, as a world leader in keys programming in Mercedes-Benz cars we had designed and released set that allows to:

- Read information from the car without the need to remove anything

- Can work in offline mode (no internet connection needed)

- Calculate keys in a very fast way

- One can program keys through the IR ports

€ 499.00
€ 499.00
MB KEYPROG2 FULL + ONLINE

MB KEYPROG2 FULL + ONLINE

Set of hardware and software allowing to program IR keys in Mercedes-Benz cars (cars equipped with ignition lock/EZS with Motorola processor, manufactured between 1997-2008). This tool allows also to program keys through IR port (with an payable update) and with one can  use NEC PCB to read/erase/write NEC processors (processors being used in IR Mercedes-Benz keys).

There’s possible communication through K-line with steering locks and ignition locks (models like 202, 210 and other), it allows also to program NEC processors.

€ 399.00
€ 399.00
MB NEC_KEY + ONLINE

MB NEC_KEY + ONLINE

Just read EZS dump file off the ignition, load it into our web server and after few moments you will receive files to program new keys with our  NEC programmer.

€ 299.00
€ 299.00
NEC KEY PROGRAMMER V.10.60 - Hardware + Software Basic

NEC KEY PROGRAMMER V.10.60 - Hardware + Software Basic

NEC v.10.60 is a basic, start package for Mercedes-Benz key programming. Although it’s just a first step in Mercedes-Benz programming it has huge possibilities and allows to not only read/ erase/ program keys in cars but also do basic diagnostics on keys (like with the use of MB Key Expert). With the use of NEC PCB (included in the set) one can easily read/erase/write NEC processors used in Mercedes keys.  If you work with older generation of keys, you can use MBE EEPROM programmer, to read/rease/write information in Motorola processors.

You can easily upgrade your tool with extra features, simply choose one in related products and you can do even more.

€ 249.00
€ 249.00
IR TOOLS

IR TOOLS

This package of hardware and software allows to read basic information stored in Mercedes-Benz ignition locks (EIS/EZS). You can read SSID of ignition lock, HASH codes of keys and status of the keys (with use of colors).

€ 179.00
€ 179.00
NEC KEY PROGRAMMER V.10.62 - Software Update

NEC KEY PROGRAMMER V.10.62 - Software Update

MBE Mercedes NEC Key Programmer update to software v.10.62 allows to use BE keys and adds BE soft tools to your software.

Now with the use of IR port in your MB Key Prog you can read/write/erase BE keys (no need to solder/ desolder processor).

€ 45.00
€ 45.00
NEC KEY PROGRAMMER V.10.65 - Software Update

NEC KEY PROGRAMMER V.10.65 - Software Update

MBE Mercedes NEC Key Programmer update to software v.10.65 adds two extra features to your software;

- pre-programming of keys for W212 Mercedes-Benz vehicles; with the use of IR port you can read key data: key number, SSID, hash, password of W212 keys by yourself;

- usage of BE keys and adds BE soft tools to your software; with the use of IR port in your MB Key Prog you can read/write/erase BE keys (no need to solder/ desolder processor)

€ 89.00
€ 89.00
EIS/EZS PASSWORD READER SOFTWARE

EIS/EZS PASSWORD READER SOFTWARE

EIS/EZS Password Reader is a specially designed tool allowing to read hash codes/ information about keys/ password directly from Mercedes-Benz ignition lock (EIS/EZS) through IR port (with use of IR Tools). You can use those information to calculate and program new key in matter of a  few minutes without need to desolder  processor from key. Constantly updated software covers up to 70% of the vehicles.

€ 134.00
€ 134.00
IR TOOLS ADVANCED

IR TOOLS ADVANCED

This set of tools contains hardware (IR Tools) and software (EIS/EZS Password Reader and Key Emulation).

With the use of EIS/EZS Password reader you can easily read hash codes/ information about keys/ password directly from the Mercedes-Benz ignition lock (EIS/EZS) through IR. You can also emulate original Mercedes-Benz key with the use of IR Tool (this feature is especially useful when you have W203 vehicle with a non working NEC key) to quickly check if the problem you had encountered is located inside of the ignition lock (EIS/EZS) or steering lock (ESL/ELV).

€ 315.00
€ 315.00
MB TESTING KEY + NEC IC SOCKET

MB TESTING KEY + NEC IC SOCKET

If you are not sure, if the keys you had calculated will work properly, you can use our Testing key. In that set you can find NEC PCB and NEC IC socket, both will allow you to use NEC processor programmed with use of other MB tools and check your work and calculation of key.

€ 180.00
€ 180.00
NEC IC SOCKET

NEC IC SOCKET

Special IC socket (OPEN TOP type) for MB Programmer.

€ 49.00
€ 49.00
MERCEDES KEY OFFLINE GENERATION

MERCEDES KEY OFFLINE GENERATION

Powerful software tool, installed on your PC, without a need for Internet connection, offering possibility to calculate files for programming Mercedes-Benz keys in a few minutes. Process cannot be any easier, as you simply load file that you had read from ignition and PC software calculated files for you. Using this system will keep the original configuration of the bin-file of the EIS(EZS),so in the future if a new key is ordered from the dealer,you can be sure that this key will work without any problems! You also receive files that allows you to write them into NEC or MOTOROLA processors (with use of NEC PCB or EEPROM programmer) and also into special keys developed by MBE (BE keys).

€ 89.00
€ 89.00
MERCEDES KEY ONLINE GENERATION

MERCEDES KEY ONLINE GENERATION

Powerful software tool, in cloud, offering possibility to calculate files for programming Mercedes-Benz keys in a few minutes. Process cannot be any easier, as you simply upload file that you had read from ignition and server will send calculated files into your email account. Using this system will keep the original configuration of the bin-file of the EIS(EZS),so in the future if a new key is ordered from the dealer,you can be sure that this key will work without any problems! You also receive files that allows you to write them into NEC or MOTOROLA processors (with use of NEC PCB or EEPROM programmer) and also into special keys developed by MBE (BE keys).

€ 89.00
€ 89.00
BE Key 433 MHz

BE Key 433 MHz

STATUS 21 DF, key software version BE. Ready to be programmed via IR!

Supported by BE SOFT option (NEC prog v.10.62, v.11, v.12): read ID, read EEPROM, erase, write - everything via IR!

Could be programmed via IR port (WRITE option only) by NEC prog basic v.10.60 too.

NOTE: Key blade is sold seperately!

€ 45.00
€ 45.00