MB TESTING KEY + NEC IC SOCKET

MB TESTING KEY + NEC IC SOCKET

If you are not sure, if the keys you had calculated will work properly, you can use our Testing key. In that set you can find NEC PCB and NEC IC socket, both will allow you to use NEC processor programmed with use of other MB tools and check your work and calculation of key.

€ 180.00
€ 180.00
NEC IC SOCKET

NEC IC SOCKET

Special IC socket (OPEN TOP type) for MB Programmer.

€ 49.00
€ 49.00
BE Key 433 MHz

BE Key 433 MHz

STATUS 21 DF, key software version BE. Ready to be programmed via IR!

Supported by BE SOFT option (NEC prog v.10.62, v.11, v.12): read ID, read EEPROM, erase, write - everything via IR!

Could be programmed via IR port (WRITE option only) by NEC prog basic v.10.60 too.

NOTE: Key blade is sold seperately!

€ 45.00
€ 45.00
Electronic board for BE key 315 Mhz

Electronic board for BE key 315 Mhz
new!

STATUS 21 DF, key software version BE. Ready to be programmed via IR!

Supported by BE SOFT option (NEC prog v.10.62, v.11, v.12): read ID, read EEPROM, erase, write - everything via IR and BGA software!

Could be programmed via IR port (WRITE option only) by NEC prog basic v.10.60 too.

NOTE: It fits original key case only you're able to cut a piece out of the case for a coil space.

€ 30.00
€ 30.00
Electronic board for BE key 433 Mhz

Electronic board for BE key 433 Mhz
new!

STATUS 21 DF, key software version BE. Ready to be programmed via IR!

Supported by BE SOFT option (NEC prog v.10.62, v.11, v.12): read ID, read EEPROM, erase, write - everything via IR and BGA software!

Could be programmed via IR port (WRITE option only) by NEC prog basic v.10.60 too.

NOTE: It fits original key case only you're able to cut a piece out of the case for a coil space.

€ 30.00
€ 30.00
Kit for PASS READING AC Delco BOSCH ECUs

Kit for PASS READING AC Delco BOSCH ECUs

Kit for PASS READING AC Delco BOSCH ECUs

€ 20.00
€ 20.00
Adapter – cable to pin (x 5pcs)

Adapter – cable to pin (x 5pcs)

This adapter is used to connect WHITE and BROWN wires from X FLASHER (MAGP50.1) by universal cable for TC Bootloader (MAGP0.2.30)  and from MAGP1.18 PLUGIN to ECU connector.

€ 15.00
€ 15.00
Challenger Clip

Challenger Clip

It can be used to connect boot pads directly to MCU pads (for example the TC1793 used in FIAT MED17C69 or FIAT MED17.3.3)

€ 10.00
€ 10.00